[. . . ] Prevent ESD damage by following ESD guidelines every time you replace the keyboard. Warning To avoid exposure to dangerous electrical voltages and moving parts, turn off your notebook and unplug the power cord and modem and network cables before opening the case. www. gateway. com 1 Before replacing the keyboard, follow these guidelines: Turn off your notebook. [. . . ] For more information, see "Changing batteries" in your user guide. Disconnect all peripheral devices and remove any PC Cards. Before working with notebook components, follow these guidelines: Avoid static-causing surfaces such as carpeted floors, plastic, and packing foam. Remove components from their antistatic bags only when you are ready to use them. Do not lay components on the outside of antistatic bags because only the inside of the bags provide electrostatic protection. Replace the four keyboard screws. Screws www. gateway. com 9 7 Slide the two tabs on the left end of the bezel under your notebook frame. 8 Press down on the bezel in several places until it clicks in place. The bezel is correctly mounted when you can run you finger along the bezel and find no loose spots. The bezel should be flat all the way across. Warning If the bezel is not correctly replaced, your notebook could be damaged when you try to close the LCD panel. 9 10 Replace the main and optional secondary batteries. Connect the power adapter and modem and network cables, then turn on your notebook. Technical Support See your user's guide for Gateway Technical Support information. Safety, Regulatory, and Legal Information See your user's guide for important safety, regulatory, and legal information. © 2003 Gateway, Inc. [. . . ] Gateway, Gateway Country, the Gateway stylized logo, and the black-and-white spot design are trademarks or registered trademarks of Gateway, Inc. [. . . ]